The fish tank should be disinfected before watering to prevent bacteria in the tank from merging into the water. The breeder can soak the fish tank with potassium permanganate. After that, the water that has been dried in advance is poured into the fish tank, and then the oxygen pump is turned on for oxygenation and aeration. After aeration, you can put a heating rod into the tank, increase the water temperature to a temperature suitable for fish growth, and then you need to wait, usually after a week, the water is good.
The correct way to raise water in a fish tank
If you want to raise water for the fish tank, the breeder must first sterilize the fish tank. Prevent bacteria in the tank from merging into the water. Breeders can use potassium permanganate solution to soak the fish tank for 1 to 2 hours, and clean the filter system and decorations in the fish tank.
After disinfection, start pouring clean water into the fish tank. Do not open the filter device on the first day after filling, just turn on the oxygen pump and fill the fish tank with sufficient water. Oxygen until the water in the tank starts to churn. After a day of aeration, the filter system and heating rod can be turned on.
The breeder needs to use a heating rod to heat the water temperature to a temperature suitable for the growth of the fish, and then keep the water temperature stable. After the water temperature is heated, the filter system can be turned on for the fish tank. At this time, the water quality in the tank will be turbid. The breeder needs to wait for a week or so. When the water becomes clear, the water raising is completed.
